System performance evaluation
ADMINISTRATORON-PREMISE ONLY
The following procedures are intended to establish a baseline performance assessment aligned with Aegis-defined acceptable response time thresholds. These steps should be performed in conjunction with the data collected above to ensure a comprehensive and well-rounded evaluation of the system’s current performance profile.
Testing should be conducted using two separate client workstations. Each function should be executed three times, with the duration of each run recorded. The use of a stopwatch or equivalent timing tool is recommended to ensure accuracy and consistency. A CAD and BOM of your choosing may be used for testing; however, for benchmarking and comparison purposes, the selected data set must be suitable for submission to Aegis.
Example – All times are recorded in seconds.
Task | New Assembly (Import CAD/BOM) | ||||||
Start Clock | Upon clicking Import Button | ||||||
Stop Clock | All files imported and processed, BOM is displayed | ||||||
Detailed Procedure |
| ||||||
Please attach CAD and BOM files used to report submission email | |||||||
Notes or | Example | ||||||
1 | Workstation 1 | 2.5 | 3.0 | 2.7 |
|
| |
2 | Workstation 2 | 4.2 | 4.8 | 5.0 |
|
| |
The following will be done in FactoryLogix Office:
Task | New Assembly (Import CAD/BOM) | ||||||
Start Clock | Upon clicking Import Button | ||||||
Stop Clock | All files imported and processed, BOM is displayed | ||||||
Detailed Procedure |
| ||||||
Please attach CAD and BOM files used to report submission email | |||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
| ||
Task | Apply New Process Template to Existing Process | ||||||
Start Clock | Upon selecting the new Flow to be applied and clicking OK | ||||||
Stop Clock | Process Flow applied, NPI responsive to input once again | ||||||
Detailed Procedure |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
| ||
Task | New Process Revision from existing Process | ||||||
Start Clock | Upon clicking the Finish button | ||||||
Stop Clock | Copy Process complete, BOM Displayed | ||||||
Detailed Procedure | New Process Revision → Select Copy from existing → select source Process → Click Finish | ||||||
Please specify source |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Opening an existing Process Revision | ||||||
Start Clock | Upon selecting the Process Revision to be opened | ||||||
Stop Clock | Process Revision open, Process Flow displayed | ||||||
Detailed Procedure |
| ||||||
Please specify target |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
The following will be done in FactoryLogix Operations:
Task | Production Login | ||||||
Start Clock | After entering Username/password, click Login | ||||||
Stop Clock | Recent Batches/Operations displayed | ||||||
Detailed Procedure |
| ||||||
Please specify User Name used to login | AegisAdmin | ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Opening an Operation | ||||||
Start Clock | From the Production Home Screen (Batch Selector) Select an Operation to open | ||||||
Stop Clock | Operation Loaded, Production responsive | ||||||
Detailed Procedure | Load Operation → Sign off → Sign back in → Load Operation) | ||||||
Please specify Batch and Operation used |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Initialize Panel | ||||||
Start Clock | Upon clicking the Initialize Panel button | ||||||
Stop Clock | Confirmation dialog appears | ||||||
Detailed Procedure |
| ||||||
Please specify Batch and Operation used |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Initialize Single Unit | ||||||
Start Clock | After scanning a unit to initialize, or upon clicking the Initialize Product button | ||||||
Stop Clock | Confirmation dialog appears | ||||||
Detailed Procedure |
| ||||||
Please specify Batch and Operation used |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Operation Switching | ||||||
Start Clock | Selecting new Operation (from existing) known to use a different Operator Interface | ||||||
Stop Clock | New Operation loaded and Production becomes responsive | ||||||
Detailed Procedure | (Sign out) → Sign in → Load Operation 1 → Open Operation 2 | ||||||
Please specify the Batch and |
| ||||||
Please specify the target (second) Operation |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Start a Barcode | ||||||
Start Clock | Upon scanning a new barcode into an Operation, or upon clicking the Submit Item(s) | ||||||
Stop Clock | Confirmation dialog appears | ||||||
Detailed Procedure |
| ||||||
Please specify Batch and Operation used |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Cycle Through Activities | ||||||
Start Clock | Barcode already started, and first Activity selected, navigate through all Activities | ||||||
Stop Clock | Last Activity is selected/acknowledged | ||||||
Detailed Procedure |
| ||||||
Please specify Batch and Operation used, if different |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Finish a Barcode | ||||||
Start Clock | Once the last activity above is acknowledged, click Finish/Submit | ||||||
Stop Clock | Confirmation dialog appears | ||||||
Detailed Procedure |
| ||||||
Please specify Batch and Operation used, if different |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Packing a Unit | ||||||
Start Clock | Upon scanning a unit to be packed in a box | ||||||
Stop Clock | Screen refreshes with Unit showing loaded in that box | ||||||
Detailed Procedure |
| ||||||
Please specify Batch and Operation used |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Task | Trace a Unit | ||||||
Start Clock | Upon scanning a unit, or upon clicking submit button if typed manually | ||||||
Stop Clock | Screen refreshes with WIP details | ||||||
Detailed Procedure |
| ||||||
Please specify Barcode of Unit Traced |
| ||||||
Notes or |
| ||||||
1 | Workstation 1 |
|
|
|
|
| |
2 | Workstation 2 |
|
|
|
|
| |
Please use the following to record the system specs of the 2 workstations used for the above tests:
Workstation 1 | |
Test User Name | |
System Name |
|
Location |
|
Make / Model / Type |
|
Processor (CPU) |
|
Memory (RAM) |
|
Operating System |
|
Network Connection |
|
Read Speed |
|
Write Speed |
|
Workstation 2 | |
Test User Name |
|
System Name |
|
Location |
|
Make / Model / Type |
|
Processor (CPU) |
|
Memory (RAM) |
|
Operating System |
|
Network Connection |
|
Read Speed |
|
Write Speed |
|